Beelink EQ13 vs Dell OptiPlex Micro: Which Should You Buy?

Affiliate disclosure: some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you. See our full disclosure.

Two of the cheapest ways into a home lab right now are a brand-new tiny N100 box and a used enterprise micro desktop. I’ve run both styles of machine, and the honest answer is that they solve different problems. The Beelink EQ13 is the shiny new low-power node; the Dell OptiPlex Micro is the battle-scarred used workhorse. Here’s how I’d choose between them.

Quick verdict

You are…Buy this
Building a router/firewall, a dedicated low-power always-on node, or anything that needs two network portsBeelink EQ13
On the tightest budget and want a reliable general-purpose mini server for containers, DNS, or a small NASDell OptiPlex Micro
Want the lowest idle power and a warranty-backed new unitBeelink EQ13
Want more RAM headroom and a spare SATA slot for a 2.5” driveDell OptiPlex Micro
Running pfSense/OPNsense or a dual-NIC setupBeelink EQ13 — no contest
Buying your very first used homelab box and don’t mind older siliconDell OptiPlex Micro

Spec-by-spec

SpecBeelink EQ13Dell OptiPlex Micro
Price$200$150
CPUIntel N100 (4C)Intel Core i5 (8th–10th gen, used)
RAMUp to 16GB DDR48–32GB DDR4
Network2x 2.5GbE1x 1GbE
TranscodingYes (N100 QuickSync)Yes (Intel UHD)
Bays / expansionNVMe, very low power1x NVMe + 1x SATA
ConditionNewUsed
Best forCheap low-power nodeCheap used homelab

The networking story is the whole ballgame

If I’m being blunt, the dual 2.5GbE ports on the EQ13 are the single most important line in that table. For a firewall, a router, or any box that sits between your WAN and LAN, a single 1GbE port is a non-starter — you literally can’t build a router around the OptiPlex Micro without adding a USB NIC, which I’ve never trusted for a production-ish role. The EQ13 gives you two proper 2.5GbE interfaces out of the box, and it does it in a chassis that’s genuinely tiny.

The OptiPlex, by contrast, gives you exactly one 1GbE port. That’s fine for a node that just talks to the rest of the network, but it caps your ceiling. If your switch and NAS are already on multi-gig, the Dell becomes the bottleneck. For most people running a 1GbE flat network, though, it’s a non-issue — and that’s the honest framing.

Power, silicon, and the “low ceiling” caveat

The EQ13’s N100 is a four-core chip that sips power — the facts list “very low power” as a defining trait, and that’s the reason to buy it. For an always-on node doing DNS, a reverse proxy, Home Assistant, or a lightweight container host, that low draw is exactly what you want. The trade-off is the “low ceiling”: the N100 is a modest chip, and you’re capped at 16GB of DDR4. It’s a great small node and a mediocre heavy-workload machine. Know that going in.

The OptiPlex Micro is the opposite trade. You’re buying used 8th–10th gen Core i5 silicon — older, yes, but with more RAM headroom (up to 32GB per the specs) and a second storage option in that SATA slot alongside NVMe. If your plan involves more RAM-hungry services or a local drive for bulk data, the Dell’s flexibility wins. The catch is exactly what you’d expect: it’s used, it’s an older generation, and you’re inheriting someone else’s decommissioned fleet machine. In my experience these enterprise micros are built like tanks and run quiet, but you should budget for the occasional fan or CMOS battery.

Both chips transcode — the N100 via QuickSync, the Dell via Intel UHD — so if Plex/Jellyfin is on your list, neither is disqualified. Don’t expect either to be a transcoding monster; they’re both “yes, it works” rather than “yes, it flies.”

Pros & cons

Beelink EQ13

  • ✅ Dual 2.5GbE — the router/firewall pick, full stop
  • ✅ N100 with QuickSync transcoding
  • ✅ Tiny and very low power; new with a warranty
  • ❌ Low ceiling: modest CPU, capped at 16GB DDR4
  • ❌ Pricier at $200

Dell OptiPlex Micro

  • ✅ Cheapest entry at $150
  • ✅ Reliable, quiet enterprise build
  • ✅ Up to 32GB RAM and an extra SATA slot
  • ❌ Used, older-generation silicon
  • ❌ Only 1x 1GbE — no dual-NIC router duty

Which should you buy

Buy the Beelink EQ13 if your job is networking or always-on low-power duty. The dual 2.5GbE ports and the tiny, efficient N100 make it the obvious firewall/router/low-power-node choice, and buying new means no surprises. Accept the low ceiling and don’t ask it to be a compute beast.

Buy the Dell OptiPlex Micro if you want the cheapest reliable general-purpose mini server and you’re comfortable with used gear. More RAM headroom and a SATA slot give it more room to grow for containers, DNS, or a small storage role — as long as you don’t need a second NIC.

Whichever you pick, two things are non-negotiable for me. First: it is not a backup until a copy lives off-site. A single mini PC with a single drive is one failure away from a very bad day. Point your backups at Backblaze B2 or IDrive so a copy actually survives the box dying. Second: for remote access, skip port-forwarding and use Tailscale — free, easy, and it keeps services off the open internet. If you want a whole-network mesh instead of per-device, NordVPN Meshnet is a solid alternative.

FAQ

Is the Beelink EQ13 good for a home firewall or router? Yes — this is its strongest use case. The dual 2.5GbE ports let you put one interface on WAN and one on LAN without add-on hardware, and the low-power N

Homelab essentials

Whichever tools you land on here, two things make any self-hosted setup safer:

  • Privacy + secure remote access — reach your services from anywhere without exposing ports to the internet. Our pick is NordVPN — independently audited no-logs, fast, with Meshnet built in for linking your devices.
  • Off-site backup for your configs & data — pCloud, EU/Swiss-based with optional zero-knowledge encryption and one-time lifetime plans, so a dead drive never costs you your setup.