Beelink EQ13 vs GMKtec NucBox G3: Which Should You Buy?

Affiliate disclosure: some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you. See our full disclosure.

Two mini PCs, the same Intel N100 quad-core inside, and a price gap of just thirty bucks. On paper that looks like a coin flip. It isn’t. These two boxes are aimed at genuinely different jobs, and picking the wrong one for your use case is the kind of mistake you only notice three months in when you’re out of ports and out of patience.

I’ve run enough cheap nodes to know that the spec sheet never tells the whole story — but here it tells most of it. Let’s break down the Beelink EQ13 and the GMKtec NucBox G3 on the things that actually matter for a homelab.

Quick verdict

You are…Buy this
Building a router, firewall, or low-power always-on node that needs real network throughputBeelink EQ13
On the tightest possible budget and just need a capable little N100 boxGMKtec NucBox G3
Running a single-purpose service (DNS, Pi-hole, a small container host)GMKtec NucBox G3
Wanting dual 2.5GbE for a virtualized router or NAS front-endBeelink EQ13

If you only read one line: the EQ13 is the networking box, the G3 is the budget box. Same brain, different body.

Spec-by-spec

SpecBeelink EQ13GMKtec NucBox G3
Price$200$170
CPUIntel N100 (4C)Intel N100 (4C)
RAMUp to 16GB DDR4Up to 16GB DDR4
Network2x 2.5GbE1x 1GbE
TranscodingYes (N100 QuickSync)Yes (N100 QuickSync)
Storage / expansionNVMe, very low powerSingle NVMe
Best forCheap low-power nodeUltra-budget N100

The CPU, RAM ceiling, and QuickSync story are identical. Everything that separates these two lives in the networking and expansion rows — and that’s exactly where you should focus.

The networking gap is the whole decision

This is not a subtle difference. The EQ13 gives you two 2.5GbE ports; the G3 gives you a single 1GbE port. For a lot of homelabbers that single line decides the entire purchase.

Two NICs on a low-power N100 is the classic recipe for a software router or firewall — one port WAN, one port LAN, and you’ve got a box that sips power and does the job. The 2.5GbE on the EQ13 also means headroom if your switch and ISP ever catch up. The G3’s single 1GbE port can’t do that job at all; it’s a client, not a gateway.

If you’re not routing, though, that second NIC is dead weight. A DNS resolver, a Pi-hole replacement, a small container host, a Home Assistant node — none of those care about dual 2.5GbE. For those, the G3’s single port is completely fine, and you’ve saved money.

Power, thermals, and the “low ceiling” caveat

Beelink lists the EQ13 as very low power, which is the whole point of an N100 node you leave running 24/7. The G3 is also an N100, so it’s in the same low-power family — but the spec sheet’s emphasis on low power sits with the EQ13, and that tracks with it being pitched as an always-on node.

The honest caveat on the EQ13 is its low ceiling. It’s an N100 with up to 16GB DDR4 — great for lightweight, single-purpose workloads, not a box you’ll grow into for heavy virtualization. The G3 has the same ceiling by virtue of the same chip and RAM limit, plus basic IO and only a single NVMe slot. Neither is a compute workhorse. Buy either one expecting a nimble little service node, not a lab-in-a-box.

Both chips do QuickSync hardware transcoding, so if you’re running a media server that needs to transcode, either box can handle it. That’s a genuine equalizer — you’re not sacrificing transcoding by going cheaper.

Don’t forget the boring parts

Whichever you pick, two things matter more than the box itself:

Backups. A mini PC is not a backup. The moment you’ve got services and data on either of these, get a copy off-site. I recommend Backblaze B2 for object storage and IDrive as a straightforward alternative — both are set-and-forget once configured.

Remote access. If you’re going to reach these boxes from outside your network, do it safely. Tailscale is free, easy, and beats port-forwarding every single time. If you want a whole-network mesh rather than per-device, NordVPN Meshnet is a solid option. Never expose a homelab service directly to the internet.

Pros & cons

Pros

  • Dual 2.5GbE — the standout feature for router/firewall duty
  • N100 with QuickSync transcoding
  • Tiny footprint, very low power — ideal always-on node
  • Up to 16GB DDR4

Cons

  • Low ceiling — not a heavy-workload machine
  • $30 more than the G3, and you’re paying for networking you may not need

GMKtec NucBox G3

Pros

  • Very cheap at $170
  • Capable N100 with QuickSync transcoding
  • Up to 16GB DDR4 — same compute ceiling as the EQ13
  • Great value for single-purpose services

Cons

  • Basic IO
  • Only 1x 1GbE — rules it out as a router/gateway
  • Single NVMe slot limits storage expansion

Which should you buy

Buy the Beelink EQ13 if networking is the job. Dual 2.5GbE on a low-power N100 is a specific, valuable combination, and $200 for a quiet always-on router/firewall node is a fair price. The “low ceiling” warning is real, but if you’re routing or firewalling, you don’t need a high ceiling — you need ports and reliability.

Buy the GMKtec NucBox G3 if you want the cheapest capable N100 node for a single service. At $170 it does everything the EQ13 does on the compute side — same chip, same RAM ceiling, same transcoding — and the only thing you give up is networking and expansion you probably weren’t going to use for a DNS box or a small container host.

My take: if there’s any chance

Homelab essentials

Whichever tools you land on here, two things make any self-hosted setup safer:

  • Privacy + secure remote access — reach your services from anywhere without exposing ports to the internet. Our pick is NordVPN — independently audited no-logs, fast, with Meshnet built in for linking your devices.
  • Off-site backup for your configs & data — pCloud, EU/Swiss-based with optional zero-knowledge encryption and one-time lifetime plans, so a dead drive never costs you your setup.