UGREEN NASync DXP2800 vs QNAP TS-464: Which Should You Buy?

Affiliate disclosure: some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you. See our full disclosure.

Two Intel-powered 2.5GbE NAS boxes, a couple hundred bucks apart, aimed at very different buyers. I’ve set up enough of these to know that the spec sheet only tells half the story — the other half is software maturity and what you actually plan to run. Here’s the straight talk.

Quick verdict

You are…Buy this
Building a first NAS on a budget, mostly files + Plex, want the cheapest capable boxUGREEN NASync DXP2800
Running a stack of apps, containers, VMs, or want HDMI + PCIe expansion headroomQNAP TS-464
Nervous about brand-new software and want a mature app ecosystemQNAP TS-464
Price-sensitive and willing to grow with a younger OSUGREEN NASync DXP2800

Spec-by-spec

SpecUGREEN NASync DXP2800QNAP TS-464
Price$370$550
CPUIntel N100 (4C)Intel Celeron N5095 (4C)
RAM8GB DDR54–8GB DDR4 (to 16GB)
Network2x 2.5GbE2x 2.5GbE
TranscodingYes (N100 QuickSync)Yes + 4K HDMI 2.0
Bays / expansion2-bay + 2x M.24-bay + 2x M.2 + PCIe
Best forBudget 2-bay valueApps + virtualization
ProsCheap, capablePowerful, HDMI, PCIe
ConsYoung UGOSSecurity history

The CPU and RAM story

Both boxes use a 4-core Intel chip, but they’re not the same animal. The DXP2800 runs the N100 paired with 8GB of DDR5 — that’s a modern, efficient little platform with QuickSync for transcoding, and DDR5 out of the gate is a genuinely nice touch at this price. The TS-464 runs the Celeron N5095 with 4–8GB of DDR4, expandable to 16GB.

Here’s my honest read: on paper the N100/DDR5 combo in the UGREEN is the more modern foundation, and for straight file serving, backups, and a Plex library it’s plenty. The QNAP’s advantage isn’t raw CPU — it’s that the N5095 platform plus up to 16GB of RAM and a PCIe slot gives you room to do more at once. If you’re spinning up containers, a VM or two, and a pile of QNAP apps, the extra RAM ceiling and expansion matter more than the newer memory type. Don’t buy the QNAP expecting it to feel dramatically faster at copying files; buy it for what you can bolt onto it.

Expansion: 2 bays vs 4 bays is the real fork in the road

This is the decision that will bite you later, so think hard now. The DXP2800 is a 2-bay with 2x M.2 — great for a mirrored pair of drives plus fast NVMe cache or a dedicated pool. But two bays means when you outgrow your drives, you’re replacing them, not adding them.

The TS-464 is a 4-bay with 2x M.2 and a PCIe slot. Four bays gives you room to grow a RAID array incrementally, and that PCIe slot is the escape hatch — add a card down the line without buying a whole new NAS. If you have any instinct that your storage needs will climb, the QNAP’s chassis is the more future-proof purchase. The UGREEN wins on price-per-capability today; the QNAP wins on headroom tomorrow.

Transcoding and the HDMI wrinkle

Both transcode — the DXP2800 via the N100’s QuickSync, the TS-464 with hardware transcoding plus a 4K HDMI 2.0 output. That HDMI port is a real differentiator if you want to drive a display directly or use the box as a media appliance rather than purely a headless server. For most people streaming to TVs and phones, either handles it fine. For a living-room or direct-attach setup, the QNAP’s HDMI is the tiebreaker.

Software: maturity vs momentum

The UGREEN’s listed con — young UGOS — is the thing I’d weigh most heavily. A new OS means fewer polished apps, a smaller community, and the occasional rough edge that early adopters eat. It’s improving, but you’re signing up to be somewhat of a pioneer. The QNAP’s con is security history — QNAP has had its share of CVEs over the years, which means you must stay on top of firmware updates and lock down exposure. Neither con is a dealbreaker; they’re just different kinds of risk.

On that note: do not port-forward your NAS to the internet. For safe remote access, use Tailscale — it’s free, dead simple, and sidesteps the whole “exposed admin panel” problem. If you want a whole-network mesh instead of per-device, NordVPN Meshnet is a solid alternative. Either way, keep the NAS off the open internet.

And whatever you pick: it is not a backup until a copy lives off-site. A NAS is one power surge, flood, or fat-fingered rm away from gone. Point your important data at Backblaze B2 or IDrive for cloud backup. This matters more than any spec on this page.

Pros & cons

UGREEN NASync DXP2800

  • Pros: Cheapest capable entry here at $370; modern N100 with 8GB DDR5; dual 2.5GbE; QuickSync transcoding; two M.2 slots.
  • Cons: Only 2 bays; young UGOS ecosystem; less expansion headroom.

QNAP TS-464

  • Pros: 4 bays; PCIe slot for future expansion; 4K HDMI 2.0; RAM expandable to 16GB; mature app ecosystem built for apps and virtualization.
  • Cons: $550; older N5095/DDR4 platform; security history demands diligent patching.

Which should you buy?

If you want the cheapest genuinely capable NAS for files, backups, and Plex, and you’re comfortable with a younger OS, the UGREEN NASync DXP2800 is the value pick — 8GB DDR5 and dual 2.5GbE at $370 is hard to argue with.

If you’re building an app/VM playground, want four bays and a PCIe slot to grow into, or value a mature ecosystem and HDMI output, spend the extra on the QNAP TS-464. The $180 premium buys you expansion and software maturity, not raw speed.

Whichever you choose, pair it with off-site backup (Backblaze B2 or IDrive, affiliate) and Tailscale

Homelab essentials

Whichever tools you land on here, two things make any self-hosted setup safer:

  • Privacy + secure remote access — reach your services from anywhere without exposing ports to the internet. Our pick is NordVPN — independently audited no-logs, fast, with Meshnet built in for linking your devices.
  • Off-site backup for your configs & data — pCloud, EU/Swiss-based with optional zero-knowledge encryption and one-time lifetime plans, so a dead drive never costs you your setup.